Indoor Led Display Power Supply 180 W 4.5v 40a for Led Display Board NHI200-4.5-A manufacturer from China Shenzhen G-Orient Technology Co.,Ltd

Indoor Led Display Power Supply 180 W 4.5v 40a for Led Display Board

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: NHI200-4.5-A

Indoor Led Display Power Supply 180Watts 4.5v 40a for Led Display Board

Indoor Led Display Power Supply 180Watts 4.5v 40a for Led Display Board

Competitive Advantage:

* Ultra-thin 30mm

* Ultra-low start up temp.(- 40)

* synchonous rectification

* High efficiency up to 85%

* Small size,ultra-light and easy to install

* CE / ROHS / FCC approval

* Protections:Short circuit / Overload / Over voltage / Over temperature

Company Advantage:

* High quality products

* Short lead time

* Professional R&D team

* Standardized production process

Features:

* 2 years warranty

* Cooling by free air convection

* Withstand 300vac surge input for 5 second

* Built-in constant current limiting circuit

* 100% full load burn-in test

* Fixed switching frequency at 90KHz

* Low cost,high reliability

* Protections:Short circuit / Overload / Over voltage / Over temperature

Applications:

* Stage

* Military project

* LED Lighting

* urban landscape lighting

* Communication security equipment

* indoor and outdoor advertising screens

* New energy and other Various industries

Specifications:

Switching power supply		NHI200-4.5-A
OUTPUT	DC Voltage	4.5V
	Current Range	0~40A
	Rated Current	40A
	Rated Power	180W
	Ripple & Noise(max.)	<250mVp-p
	Voltage ADJ.Range	4.05~4.95V
	Voltage Tolerance	+/- 2.0%
	Line Regulation	+/- 0.5%
	Load Regulation	+/- 1.0%
	Setup,Rise Time	1000ms,50ms/230VAC
	Hold up time	20ms/230VAC
INPUT	Voltage Range	200-240VAC
	Frequency Range	47-63Hz
	Efficiency(Typ.)	83-88%
	AC Current	2.5A/230VAC
	Inrush Current(max.)	55A/230VAC
	Leakage Current	< 3.5mA /240VAC
Protection	Over Load	105 ~ 150% rated output power
	Over Load	Protection type: Constant current limiting,recovers automatically after fault condition is removed
	Over Voltage	5.2 ~ 6.3V
	Over Voltage	Protection type: Shut down O/P voltage,re-power on to recover
	Over Temperature	100 +/- 5
	Over Temperature	Protection type: Shut down O/P voltage,recovers automatically after temperature goes down
Environment	Working Temp.	-40 ~ +60 (Refer to output load derating curve)
	Working Humidity	20 ~ 90% RH, non-condensing
	Storage Temp., Humidity	-40 ~ +85, 10 ~ 95% RH
	Temp.Coefficient	+/-0.03%/ (0 ~ 50)
	Vibration	10 ~ 500Hz, 5G 10min./1 cycle,60min. Each along X, Y, Z axes
Safety	Safety standards	UL60950-1 approved
	Withstand Voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25 / 70% RH
Others	MTBF	271.9K hrs min. MIL-HDBK-217F(25)
	Dimension	1908530mm (LWH)
	Packing	0.8kg; 20pcs/16Kgs
Note	1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20Mhz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
	3. Tolerance: includes set up tolerance,line regulation and load regulation.
	4. Please connect positive pole of input voltage with mark”L” of terminal block,connect negative pole of input voltage with mark”N” of terminal block,using DC voltage for input voltage